Biomass Generator Set/Syngas Generator Set
1) The external components (such as spark plug, mixer, electronic governor, ignition controller, etc.) all use high-quality products to ensure the quality and reliability of the straw gas machine.
Product Description
Characteristics of Biomass Gas Generator Set:
1) The external components (such as spark plug, mixer, electronic governor, ignition controller, etc.) all use high-quality products to ensure the quality and reliability of the straw gas machine.
In order to improve the sealing performance of the valve work, the intake and exhaust valves are equipped with valve rotation mechanism, which can work at the same time. Reduce the combustion of carbon deposits caused by uneven gas valve leakage.
2) generator sets imported by the brushless excitation of the production of non-polar motor, advanced motor design, high insulation, sensitive and reliable voltage regulator system. The control panel uses the domestic high quality main switch and the controller.
3) The unit set up all kinds of necessary safety protection device. Including speeding, low oil pressure, the machine water temperature high automatic alarm, off the gate, shut down. Oil and water temperature is high, the generator over-current, under-voltage protection; parallel (or grid) units of the reverse power gate, alarm protection. In the control panel with emergency stop button, the unit can be an emergency shutdown failure. Outer leakage of the moving parts are equipped with beautiful and safe protective cover.
4) The control panel is separately set to the floor cabinet structure, the control screen is equipped with the main switch, a variety of display instruments, adjustment knob, unit protection devices and indicators. Can be compartment monitoring the operation of the unit; control unit operating load; adjust unit operating parameters and unit operation.
5) The mixer uses the throat type mixer to increase the starting manifold, extremely easy to start, the automatic double disc voltage control. According to different conditions to adjust the gas mixture to ensure the realization of lean combustion.
1. environment condition：
The biomass gas generator environment temperature in -20 ℃ ~ + 45 ℃ , relative humidity < 90% (20 ℃), altitude 1200 m or less environmental conditions can be stable and reliable operation.Under the standard conditions (atmospheric pressure is 100 kpa, the environment temperature 25 ℃, air relative humidity 30%) can output rated power , and continuous operation.
3.Gas conditions：Requirement of gas quality index of biomass generator set
|
Item |
Index |
Item |
Index |
|
Calorific value of gas |
≥4000KJ/ m3 |
Hydrogen content |
≤10 %（Volume percentage） |
|
Total sulfur content |
≤200mg/ m3 |
Gas source pressure |
10～100kPa |
|
Tar content（mg/m3） |
≤50 |
||
|
Biomass gas should be processed. no liquid component, gas impurity particle size should be ≤0.005mm, the content is not greater than 0.03g/M3. |
|||
View More
